The Inground Pool Guide To Help You Choose The Right Options For Your Home

2 July 2020
 Categories: , Blog


When it comes to installing pools, there is a lot of options to consider. Inground pools are one of the best options because they give you so many options for the design and features you want. Before you install an inground pool installed, you will want to decide the type of pool and where it will be installed. The following inground pool guide will help you plan your inground pool project:

Choosing the Design

The first thing that you want to do is choose the design and type of pool to have installed. Today, there are options for concrete and fiberglass inground pools. If you want an affordable and simple installation, fiberglass is one of the best options. If you want more custom features and design, you may want to consider concrete options with a tile finish.

Beginning the Excavation Work

There is going to be some excavation work that needs to be done to install an inground pool. Therefore, you are going to need to begin marking the area where the pool is going to be installed. The excavations should be done larger than the finished pool to allow for things like plumbing installations and backfill that needs to be added later.

Installation Process for an Inground Pool

The installation process will be the longest stage of your inground pool project. If you are using a fiberglass pool, the pool will be lowered into place on top of the aggregate. If you are doing a concrete pool, the forms need to be installed, and then the concrete poured. Once the forms for a concrete pool are removed, the tilework or the pool surface finish can be installed.

Choosing the Extras and Water Features

There may also be some extra features that you want to add to your inground pool. These features can include things like waterfalls, streams, and other water features, as well as other extras. You may want to add features such as diving platforms and other custom features to get more out of your investment in an inground pool.

Installing the Pump and Equipment

The last step in the process will be to install the pool pump and filtration equipment. The wiring and hard plumbing installation need to be installed to connect your pool equipment. Once the mechanical installation is complete, the pump and filtration equipment can be installed. This is also when you will want to have a pool heater installed if you are planning on having a heated system.

These are some of the things that you will want to know about installing an inground pool. When you get ready to start the inground pool project for your home, contact an inground pool service and begin planning your new pool.